How to do a Water Pressure Adjustment on your L7 Water Heater
In the event your portable tankless water heater does not allow the needed amount of water flow through to activate your microswitch, you may need to perform a water pressure adjustment to allow more water in.
To make the adjustment:
Take the screw that is furthest on the right in about 1/4 or 1/2 turn. This will enable the portable tankless water heater to operate on a lower water pressure by restricting flow.
Below, you will see a more detailed view of the internal components on the Gas/Water Valve Assembly. You can see the two adjustment screws and their location.
Please keep in mind that the L7 is NOT to be permanently mounted or left unattended as it is not recommended and can be considered a hazard. Not for indoor usage or to be vented. Also, these units are not to be plumbed in to the side or any other part of the house or location and is meant to serve for recreational use only. Using in the manners stated will void your warranty.***
If you're experiencing issues and need more assistance, please reach out to our technical support team via our LIVE CHAT feature, creating a support ticket, or setting an appointment with us.
To set an appointment CLICK HERE!
To submit a support ticket CLICK HERE!