3 Ways to Connect to the ESH
Updated over a week ago

There are 3 ways to connect to the ESH. Take a look at the 3 easy ways to connect to your ESH. If you have further questions, please send a message to our product support team at [email protected].

Auto Scan

Turn on Bluetooth, your location, and connect to WiFi. Select "Add Device" and then tap Auto Scan in the top right corner. Make sure that the ESH has a fast blinking light by holding the red power button for 5 seconds.

mceclip0.png

Auto Scan will automatically search for your ESH. Once it is located, hit the Next button. The ESH will now be added to the account.

mceclip1.png

EZ Mode

Once the add device button is selected, tap EZ Mode in the top right corner.

mceclip2.png

EZ Mode requires the device to have a fast blinking red light. Hold the solid red power button until it starts to blink quickly, then the ESH is ready to connect. Hit confirm, and the ESH will be added to the account.

mceclip3.png

AP Mode

Once the add device button is selected, tap AP Mode in the top right corner.

mceclip4.png

AP Mode requires the device to have a slow blinking red light. Hold the red power button until it starts to blink quickly, then hold it again until it is blinking slow. The ESH will now create a WiFi hotspot to connect within the phone settings under "WiFi". Once connected to the WiFi hotspot, the ESH will be added to the account.

mceclip5.png
Did this answer your question?