i12 General Information

Congratulations on the purchase of your i12 whole home tankless water heater!

Below, you will find some general information and recommended uses of the i12 tankless water heater.

 

mceclip0.png

 

mceclip1.png

mceclip2.png

mceclip3.png

mceclip4.png

Specifications of the i12 model

  • Size of the Water fitings: 1/2"
  • Size of the Gas fitings: 1/2"
  • Size of the included vent kit: 2.5"

*If you decide to purchase additional venting for this water heater or you purchase it with a bundle, you will need to get the 3" vent kit and a 2.5" - 3.0" adapter (Paloma). Please make sure the bundle comes with the Paloma adapter. 

mceclip5.png

Service Valves

If you are going to purchase service valves from us, the size of the valves are 3/4", so you will need to use an adapter to take the 1/2" to 3/4" on your incoming and outgoing water connections to fit with the service valve kit. 

You can purchase the service valves here: https://www.eccotemp.com/eccotemp-3-4-service-valve-kit-lead-free-by-jomar/

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.