How to Replace the On/Off Switch

Replacing the On/Off Switch

mceclip0.png

  1. First, remove the cover by unscrewing the 4 screws
  2. Disconnect on/off switch from battery box. Squeeze the side of the on/off switch from inside cover to release the clasps holding it in place
  3. Push on/off switch out of the bottom of the cover.
  4. Slide wires through the hole and push in the new on/off switch until it locks in place.
  5. Reconnect wires and put the cover back on.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.