How to replace the Over Temperature Sensor on the L5

How to replace the Over Temperature Sensor on the L5

Replacing the Over Temperature Sensor

  1. First, remove the cover by unscrewing the 4 screws.
  2. The Over Temperature Sensor is located in the center of the assembly, behind the microswitch, held on by 2 screws.
  3. Unscrew the 2 screws holding the sensor on and set those screws aside in a safe place.
  4. Replace the old sensor with the new sensor, metal side down on the plate.
  5. Using the 2 screws you set aside, screw the sensor in place.
  6. Put the cover of the water heater back on using a screwdriver and the 4 screws you set aside earlier.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.