How To Replace The Battery Box and Control Pack

Replacing the Battery Box and Control Pack

mceclip0.png

  1. First, remove the cover by unscrewing the 4 screws.
  2. Disconnect wires from the microswitch, solenoid, tilt switch sensor and upper left thermocouple.
  3. Unscrew ground wire from gas flow dial base.
  4. Disconnect wires from overtemp sensor using pliers.
  5. Unscrew box from back of unit.
  6. Screw in new box to back of unit, reconnect wires and put the cover back on.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.